Á¦¸ñ ¾øÀ½
SME Turntables
& Tonearms
¹Ì±¹ÀÇ Sumiko Audio¶õ °÷¿¡¼ ÆǸÅÁßÀÎ
Á¦Ç° ÀÚ·áÀÔ´Ï´Ù.
|
MODEL 309
SME Model 309
- $1,799
An
adjustable and removable magnesium headshell provides a combination of high
performance and convenience in the Model 309 tonearm. Get the workmanship and
performance of SME- ABEC-1 bearings, LC/OFC internal wire and tonearm cable, and
static tracking force - at a more affordable price. |
|
SERIES IV.Vi
SME Series
IV.Vi- $3,499
Using
the Series V magnesium arm tube, along with ABEC-7 bearings, the Series IV.Vi is
designed specifically with moving coil cartridges in mind. 50 guage Magnan type
Vi internal wiring provides sonic excellence, along with virtually zero
mechanical impedance on the bearings. Tracking force is applied statically,
further reducing any mechanical impedance on the bearing. FD-IV tonearm lateral
damping device included to optimize cartridge performance. Adjustable cue height
to accommodate different turntable configurations. No tonearm cable
included. |
|
SERIES V
SME Series
IV.Vi- $3,999
The
classic Series V features a cast magnesium, one piece tonearm tube, supported by
ABEC-7 bearings, van den Hul mono crystal silver internal wire, van den Hul 501
tonearm cable, dynamic tracking force, and fluid controlled lateral damping.
Adjustable cue height to accomodate different turntable
configurations. |
|
Model M2
SME Model M2-
$1,399
The
Model M2 features a fully azimuth-adjustable, detachable magnesium headshell
coupled to a lightweight and still 9¡± stainless-steel tube. This arrangement
allows the Model M2 to provide exceptional performance from a wide varity of
phono cartridges. Superb quality ball race bearings, fully adjustable VTF,
tungsten counter weight and a highly accurate thumbwheel adjustable VTA makes
the M2 an exceptional value. |
|
MODEL 10
SME
Model 10 - Turntable/Tonearm Combination $7,999SME Model 10 -
Turntable only $6,999
Breaking new price barriers for SME, the new Model 10 turntable/tonearm
combination will prove to be a formidable contender against any competition. New
for SME is the use of a low, "virtually liquid" durometer elastomer material for
the suspension system and a round sub-chassis to reduce resonant planes. The new
Model 10 tonearm is unique in that it uses the cast magnesium arm tube from the
Series V, and the detachable headshell from the Series 309, making the Model 10
tonearm both high performance and versatile. The outboard power supply has 33
and 45 speeds. 12.5" diameter. 28 lbs., including arm. |
|
MODEL 20
SME
Model 20 - includes Series IV.Vi tonearm $12,499SME Model 20 -
Turntable only $9,999
The
compact Model 20 features all of the same design principles as the Model 30,
including the main bearing, platter design, and suspension system. At far less
than half the price, the Model 20 delivers to the consumer an opportunity to
have reference quality playback in a small and more affordable package.
Compatible with all SME tonearms. Blank arm boards are available for other
tonearms. The outboard power supply has 33, 45,and 78 speeds. 16.75"w x 5.5"h x
12.75"d. 40 lbs. |
|
MODEL 30
SME Model 30 -
$28,499
The
ultimate turntable. The Model 30 is compact and incredibly dense, weighing in at
90 lbs. The Model 30 employs an ingenious suspension system, using a combination
of elastomers and silicone to achieve an almost zero Q suspension. The main
bearing which supports the over 15 lb. platter has such tight tolerances it
requires a diluted watch oil to be properly lubricated! The SME platter mat has
a unique combination of high shear stiffness and effective vertical damping to
eliminate the energy feedback from the platter back into the record. The
mechanically decoupled brushless three-phase motor eliminates cogging to ensure
precise speed control, and also provides high torque to pull through the highest
of dynamic passages with breeze. The combination of compact high mass,
non-resonant materials, and speed stability in the motor/bearing assembly,
provides a playback system that will astonish you with shear dynamics, clarity,
and noise free background. All SME arms are compatible. Blank arm boards are
available for other tonearms. The outboard power supply has 33, 45, and 78
speeds. 17.75"w x 6.5"h x 13.75"d. 90 lbs. |
|