*구입전 필독사항*

AUDIO DIY는 위험 부담을 알고 자신의 책임하에 제작, 개조 및 수리 등을 하는 것입니다.  
DEXA제품은 출고시 완전히 TEST되어 판매되는 제품이므로 구입제품을 개봉한 후 생기는 문제에 대해서는
어떠한 이유로도 교환 또는 반품이 되지 않으니 이점 양지하시기 바랍니다. 

http://newclassd.com/index.php?page=124&hv=1

http://newclassd.com/index.php?page=125&hv=1

Instructions.
This is a fast OPAMP, to keep it stable, ensure good rail decoupling. Place a small
capacitor of 0.1 to 0.33 uF and 5mm or 10mm lead spacing from pin 8 (V+) to nearby GND,
and from pin 4 (V-) also to nearby GND. By nearby we mean preferably under the chip itself,
and 50 mm is way too long.

The blue trimmer is for DC null adjustment. We have already adjusted it to 5mV max, however
in case you want to readjust it, that's what it's there for. Connect a multimeter with the
red wire on output of the OPAMP, then the black wire to signal GND. Then use a small screw
driver to adjust the reading to 0mV or as close as you can.